Thanksgiving Beef Tenderloin Roast

Thanksgiving Beef Tenderloin Roast

Beef It’s what’s for dinner!

Even a Thanksgiving dinner! That’s right, enjoy a beef tenderloin this Thanksgiving Holiday. Courtesy of Bon Appetit, we have selected the perfect recipe to wow your guests.

Ingredients

  • 2 garlic cloves
  • 2 tablespoons rosemary leaves, plus sprigs
  • 1 4-pound trimmed center-cut beef tenderloin
  • Kosher salt, freshly ground pepper
  • 1 tablespoon vegetable oil
  • 1 cup plain whole-milk Greek yogurt
  • ⅓ cup sour cream
  • 2 tablespoons prepared horseradish
  • ½ teaspoon finely grated lemon zest
  • 3 tablespoons unsalted butter
  • Flaky sea salt (for serving)

 

Beef Tenderloin

Super easy to prepare, yet tastes like a million bucks. 

Beef Tenderloin Meal
Beef TZenderloin

Preparation.

Original Recipe | Bon Appetit

Do Ahead: Tenderloin can be seasoned and chilled 2 days ahead; wrap in plastic wrap after 12 hours. Horseradish yogurt can be made 1 day ahead; cover and chill.

Step 1

Thinly slice garlic, then mash into a paste using the side of a chef’s knife. Scatter rosemary leaves over garlic; finely chop and mix into garlic. Slice tenderloin in half crosswise to create 2 smaller roasts. Season generously with salt and pepper; rub with garlic-rosemary paste. If your butcher didn’t already tie the roast for you, this is the time to do it: Place tenderloin onto lengths of precut kitchen twine spaced about 1″ apart and tie closed snugly. Place on a rimmed baking sheet and chill uncovered 12 hours.

Step 2

Let tenderloin sit at room temperature at least 1 hour and up to 2 hours before cooking.

 

 

Step 3

Preheat oven to 250°. Heat oil in a large ovenproof skillet over medium-high. Add tenderloin and cook, turning occasionally, until well browned all over, 8–10 minutes. Transfer skillet to oven and roast tenderloin, turning every 10 minutes or so, until an instant-read thermometer inserted into the thickest part registers 120°, 25–30 minutes. Transfer tenderloin to a cutting board and let rest 15 minutes before removing kitchen twine and slicing. Reserve skillet.

Step 4

Meanwhile, mix yogurt, sour cream, horseradish, and lemon zest in a small bowl to combine; season with salt and pepper.

Step 5

Cook butter and rosemary sprigs in reserved skillet over medium heat, scraping up browned bits on the bottom, until butter is melted and very fragrant, about 4 minutes. Transfer sliced tenderloin to a platter; drizzle with rosemary-infused butter and sprinkle with sea salt. Serve with horseradish yogurt.

Our Profits Are Measured by More Than Just Dollars

We at 10 Mile West Cattle Company enjoy living in a small agricultural community where we have access to cultural opportunities for ourselves and our future generations.  

We are blessed with being able to choose our livlihood while sharing our work experience with our children. We are committed to expanding our work ethic into our local community by showing and promoting town and school pride, while raising productive members of society.

We will support local businesses and services. We will also share our business through active participation in local business and community organizations. 

At 10 Mile West Cattle Company we are committed to creating a more sustainable food system by empowering local and small farms, practicing land conservation, and restoring the vitality of the California foodshed. Help us continue our support of our ecological community and local economy by purchasing your quality beef from 10 Mile West Cattle Company.

Join

Shop Our Beef

1 Steer Processing

1 Steer Processing

Deposits are encouraged to be paid one week before butcher dates and cut sheets are due two days before. Meat is usually out for delivery or pick up 2 weeks from butcher date.

1 steer Available

  • FULL or HALF available

SHOP NOW

Local meat processing: Rebuild begins

Local meat processing: Rebuild begins

Original Post |  | Apr 21, 2022

It was March 2020, the month that the World Health Organization declared the coronavirus a pandemic. Meatpacking plants in the U.S. were forced to scale back or temporarily close as COVID-19 affected the workforce and, accordingly, meat supplies available to consumers.

In the small town of Lamoni, Iowa, along the central Iowa-Missouri state line, grocery stores were either limiting purchases or were completely sold out of beef and pork.

Two friends, Tad Whittom and Enos Swartzentruber, started talking over the need for a small meat locker to supply local, fresh products to their community. Meanwhile in nearby Leon, Iowa, Lonnie Cowden posed a question on Facebook about advice on starting a meat locker. As fate would have it, Whittom saw the post and messaged Cowden.

In his research, Cowden looked at a map of meat lockers in southern Iowa. There was a gaping hole in Decatur and Clarke counties and down into northern Missouri. The trio put their heads together and decided if there was a chance, they were going to fill that hole.

However, before crafting a design, Whittom once again turned to Facebook, this time to look for employees. In southwest Missouri, agriculture educator Austin Steele was searching for an opportunity to move closer to family. A friend shared the post, and Steele reached out to Whittom. In college, Steele worked at the Mizzou Meat Market. In high school, he worked at his school’s state inspected meat locker in Miller, Mo.

So, Steele, along with Cowden, provided the expertise from the meat processing industry, while Whittom and Swartzentruber supplied the financial backing to make a meat locker a reality.
The four men toured numerous processing facilities and pulled together the best of each to devise their own look. By June 2021, Red Barn Meat Market broke ground on land right off Interstate 35 at the Lamoni exit in southern Iowa.

Four men are bringing a new meat locker to Lamoni, Iowa, in an effort to serve the surrounding small towns with quality local pork and beef products. Co-owner Tad Whittom (third from left) is pictured here with (from left) Lonnie Cowden, Enos Swartzentruber and Austin Steele.

USDA grant funding paid for a portion of the new building project, and Whittom and Swartzentruber provided the rest. While the investment was substantial, they both support making a difference in their small town.

“We want our community members to have a place to go and purchase quality, local meat or have their own processed with us,” Whittom says.

Swartzentruber considers the local economic boost.

“For me, it is about bringing another business to our community to provide more jobs,” he says. Red Barn Meat Market will employ about 12 full-time employees.

 

Recognizing the need

The demise of small meat lockers across the U.S. started well before COVID-19 as the meat processing industry consolidated over the years. Then the pandemic sharpened the focus on how “just in time” the U.S. meat processing supply chain is from farm to fork.

In Minnesota, Farmers Union members had been voicing concerns about meat processing consolidation and bottlenecks for some time. When COVID hit, MFU and other stakeholders ramped up their push to the state legislature for funding to help small- to medium-sized meat processors. They also recognized the need for a workforce — specifically trained meat cutters — and worked with two community colleges on training programs.

By the end of the 2021 legislative session, Minnesota lawmakers approved more than $2.6 million for new and upgraded plants, two new meat processing certification programs at Central Lakes College in Staples and Ridgewater Community College in Willmar, a mobile slaughter unit for educational use, and additional state inspection staff.

CLC and Ridgewater are in the process of accepting applications for their one semester meat-cutting programs, which begin this fall. CLC has 13 students enrolled as of late March and can accept a total of 25 students. Ridgewater can enroll up to 20 students.

Both programs are designed for working students, offering courses in the evening and on weekends, with some instruction off-campus with licensed business partners. Enrollment for both is open until programs are filled. Fall classes start Aug. 22.

Dave Endicott, dean at the CLC Staples campus, acknowledges the new meat-cutting programs are fortunate to receive significant financial support.

“We’re also getting $2 million [in federal funds] for equipment and program development at Ridgewater and Central Lakes,” he says. “We’ll have state-of-the-art facilities for training our students.”

MFU continues to play a major role by providing support for the mobile meat slaughter trailer and two modular units — one to be used as a chill room and the other for cutting and wrapping — on the CLC campus.

If funding becomes available, a future third unit could be used as a “store” and train students in retail sales. Unfortunately, the trailer and units will not be on campus in time for the fall semester. Instead, students will practice meat cutting in the campus USDA-certified kitchen and at Cub Foods in Baxter and Brainerd.

“We’ve had such a great experience with partners in the ag and retail world and the support of farmers,” Endicott adds. “MFU, the [Minnesota] Agricultural Utilization Research Institute, the grocers’ union, our legislators, plus funding from the governor’s budget — it’s really been an across-the-board bipartisan effort for small and medium farmers.”

Future meat processing investments could continue, assuming lawmakers reach an agreement on funding by the end of session in May. This spring, the governor proposed $8.7 million for plant expansion, employee recruitment and training and meat inspection.

The state House proposed $5.2 million for secondary school meat processing training; grants to help start up, modernize and expand facilities; technical training programs; state meat inspection; and financial assistance for South St. Paul Hmong meat processors operating out of the once-closed St. Paul Stockyards. The state Senate proposed $1.7 million, with $1 million of that specifically for secondary school meat processing.

Stu Lourey, MFU director of government relations, acknowledges that meat processing facilities, which require lots of stainless steel, are expensive to build.

“We’re trying to rebuild a system that was disinvested, and we’ve got a long ways to go,” he says.

 

Offering processing and product

Iowa’s Red Barn Meat Market expects to open at the end of May for both custom processing and retail meat offerings.

Initial startup will be slow, custom-processing 18 beef and 18 pork carcasses per week. It will ramp up to its 30-30 split quickly. Cowden says interest is already high, with people already asking when they will start taking orders. “We could easily fill out the calendar year right now,” he notes.

The company will incorporate technology such as Smart Locker, currently in beta testing, to provide traceability for custom processing orders. Steele explains that the web-based booking platform performs similar to a hotel booking site, allowing customers to select a date for processing, fill out their requests via a cut sheet and even divide up the animal by multiple buyers.

Mindy WardRed Barn Meat Market

One of the attractions drawing drivers off exit 4 on Interstate 35 in southern Iowa is the state’s welcome center. Four men hope to change that as their new big Red Barn Meat Market garners attention. The meat market will provide custom processing, as well as a retail meat counter, for visitors to the small town of Lamoni.

Individuals will pay a small deposit to secure their spot. From the time the animal is dropped off, through processing, into storage and finally at pickup, the product is linked to the customer.

In the retail meat case, Red Barn will offer its own branded beef. Steele says the company will contract with a few farmers to feed out calves with a specific company-approved ration that targets the animal grading Choice Plus or above.

The ability to control quality through feed and cattle sourcing, he adds, will foster a good eating experience for customers. The company also will have a website where customers can order and ship items directly to their homes.

 

National investment

During the past several months, USDA has announced a number of programs to help expand and upgrade meat processing facilities. USDA Rural Development is making $150 million of American Rescue Plan Act funding available through the Meat and Poultry Processing Expansion Program to fund startup and expansion activities in the meat and poultry processing sector.

USDA’s National Institute of Food and Agriculture will provide another $40 million through existing workforce development programs to provide a pipeline of trained workers to meet the demand for both processors and increased independent processing capacity. And the Agricultural Marketing Service will provide $25 million to offer technical assistance to grant applicants and others seeking resources related to meat and poultry processing.

In March, USDA announced extending the deadline to May 11 to apply for MPPEP funding. The agency encourages applications for meat processor startups and expansions that benefit smaller or new farms, tribes and tribal producers, and underserved communities.

The USDA also announced in March the launch of the Meat and Poultry Processing Capacity Technical Assistance Program to provide technical assistance to meat and poultry grant applicants and grant-funded projects. Processors and applicants involved with the Meat and Poultry Inspection Readiness Grant program and MPPEP can access this technical assistance.

USDA also is now accepting applications for $23.6 million in competitive grant funding available through the MPIRG program. Grants can be used to build new or modernize existing processing facilities; update equipment and technology; improve food safety; and for workforce recruitment, training and retention.

For more information on USDA programs, visit usda.gov/meat.

To learn more about the community college programs in Minnesota, visit Central Lakes College and Ridgewater Meat Cutting and Butcher.